Industrial Ethernet Acquisition Module

Function Introduction:
The Deming Electronics 93 remote I/O module can be used to measure eight channels of digital signals and has eight channels of digital outputs. It can function as an 8-channel counter or 8-channel frequency measurement device,
and can also output 8 channels of PWM signals.
1、 Digital Signal Input and Output
8 channels of digital signal input, compatible with dry contacts and wet contacts (please refer to the wiring diagram section for details); 8 channels of digital signal output with open-collector output.
2、 Communication Protocol
Communication interface: RJ-45 Ethernet interface. The two indicator lights near the Ethernet port: the Link light (green) stays on when the network cable is connected, and the Data light (yellow) flashes intermittently.
Communication protocol: MODBUS TCP protocol is used for industrial Ethernet data exchange. The control module can also be accessed directly via a web page.
Network buffer: 2K Byte (both for receiving and sending)
Communication response time: less than 10mS.
3、 Anti-interference
The module has built-in transient suppression diodes, which can effectively suppress various surge pulses and protect the module.

Product Features:
● 8 channels of digital input, 8 channels of digital output
● Each DI channel can be used as a counter or for frequency measurement
● Each DO channel can independently output PWM signals
● Supports Modbus TCP communication protocol
● Built-in web page function allows checking signal levels via a web interface
● Output status can be set via the web page
● Wide power supply range: 8 ~ 32VDC
● High reliability, easy programming, and simple application
● Standard DIN35 rail mounting for centralized wiring convenience
● Users can set the module's IP address and other parameters on the web page
● Web login can be password-protected for enhanced security
● Low cost, compact size, modular design
● Dimensions: 120 x 70 x 43mm

Typical Applications:
● Pulse counting or flow measurement for flow meters
● LED lighting control or motor control
● Smart building control, security systems, and other application systems
● Signal isolation and long-distance transmission in industrial settings
● Equipment operation monitoring and control
● Measurement of sensor signals
● Status monitoring and control of industrial cameras
● IoT digital signal acquisition